Looking to mount an iKamper roof top tent to your Yakima rack system? Below is a quick reference guide for Yakima towers and their compatibility with the Skycamp 3.0 and 2.0 Series tents.
We’ve noted where additional parts or mounting adjustments may be required.
Rack | Mounting Brackets 3.0
(Skycamp 3.0 Series, X-Cover 3.0/2.0) | Mounting Brackets 2.0
(Skycamp 2.0 Series) | BDV Mounting Brackets | Notes | Example Images |
Skyline Tower | Yes | Yes |
|
|
|
Ridgeline Tower | No | No |
| Clamp - Reasoning: iKamper tents can not be installed on roofs with flush rails |
|
Baseline Tower | Yes with changes | Yes with changes |
| Can be used if used with corresponding landing pad |
|
Timberline Tower | Yes | Yes |
|
| 
|
Sightline | No | No |
| Clamp – Conflicts with roof rails. |
|
Overhaul | Yes | No |
|
|
|
Outpost | Yes | No |
|
| 
|
Outdoorsman 300 | Yes with changes | No |
| Not ideal to install a tent on, round bars don’t offer much for the brackets to grip to, prone to loosening over time…3.0 brackets can be used if the rubber inside the brackets are cut down. |
|
Bedrock | Yes | Yes |
|
|
|
HD Bar | Yes | No |
|
| 
|
JetStream | Yes | Yes |
|
|
|
CoreBar | Yes | Yes |
|
|
|
RoundBar | Yes with changes | No |
| Not ideal to install a tent on, round bars dont offer much for the brackets to grip to, prone to loosening over time…3.0 brackets can be used if the rubber inside the brackets are cut down. |
|
If your setup requires adapters or adjustments, we recommend reaching out to our support team or your rack manufacturer to confirm load ratings and fitment.