Looking to mount an iKamper roof top tent to your Thule rack system? Use the chart below to check compatibility with roof top tents.
We’ve included notes for racks that may require adapters, spacers, or mounting adjustments.
Rack | Mounting Brackets 3.0
(Skycamp 3.0 Series, X-Cover 3.0/2.0) | Mounting Brackets 2.0
(Skycamp 2.0 Series) | BDV Mounting Brackets | Notes | Example Images |
WingBar Edge | Yes | Yes | Yes |
|
|
WingBar Evo | Yes | Yes | Yes |
|
 |
SquareBar Evo | Yes | Yes |
|
| 
|
ProBar Evo | Yes | No |
| Not ideal to install a tent on, round bars dont offer much for the brackets to grip to, prone to loosening over time…3.0 brackets can be used if the rubber inside the brackets are cut down. 1.0 brackets will not work since it is a round bar and could cause slipping. |
|
Aeroblade Edge |
|
|
| Specify which Aeroblade the cust has, the series of Aeroblades include some that re clamps and some that are full wrap arounds |
|
Caprock | Yes | No |
| Not enough clearance under rack to access hardware for 2.0. 1.0 brackets do not work because it creates a noticeable air gap causing wind noise and aesthetic issues |
|
Caprock Truck Bed |
|
|
| On 2.0 will likely need to have spacers installed between bracket and rail. Also, may need to adjust space in between cross rails |
|
Edge Flush Rail | No | No |
| Clamp- Reasoning: iKamper tents can not be installed on roofs with flush rails |
|
Rapid Podium | Yes | Yes, with changes |
| Yes only if not used in conjunction with flush rail |
|
Evo Raised Rail | No | No |
| Clamp- Reasoning: iKamper tents can not be installed on roofs with flush rails |
|
Evo Flush Rail | No | No |
| Clamp- Reasoning: iKamper tents can not be installed on roofs with flush rails |
|
Edge Raised Rail | Yes | Yes |
|
|
|
If you’re unsure about which Thule rack you have or whether your setup can support an iKamper tent, reach out to our team or your local Thule dealer for confirmation.