Unboxing & Inventory
Before you head out, make sure everything’s in the box and ready to go.
Checklist for all products:
Open the box and lay out all components.
Check against the included inventory list.
Inspect for any obvious damage.
Identify any tools needed for assembly.
Tip: Keep the original packaging handy for storage or returns.
General Setup Tips
Some steps are the same across all iKamper products:
Find a flat, safe surface before deployment.
Make sure you have enough clearance for full extension.
Check that all mounting hardware or brackets are secure.
Exoshell 270°
Carefully open and inspect your Exoshell once delivered.
Follow provided directions to install your Exoshell. See manual HERE
HERE is a helpful video
Mount L Brackets to your rack first, you can make adjustment before adding on the Exoshell 270°
HERE is the L Bracket Manual
Mount the Exoshell to the L Brackets once installed properly.
The bulk weight of the Exoshell rests on the lip of the L bracket and then is attached using two 17mm bolts per each L bracket
Annex Plus
Attach the Annex Plus to your tent or vehicle as instructed.
Secure all zippers and fasteners before use.
Stake or anchor the annex for stability.
Awning 3.0
Attach the awning to your tent at the zippered attachment point.
Use included support poles to stabilize during deployment.
Slowly extend the awning, keeping an eye on tension lines and securing any guy lines.
Final Checks
Make sure everything is secure and level.
Test zippers, brackets, and poles for smooth operation.
Take a step back and admire your setup—your adventure is ready to begin!
Need Help?
If you’re unsure about any step, our support team is happy to help at [email protected].
You can also find FAQs, tips, and additional how-to videos on our website.
Pro Tip: Always practice your first deployment at home or in a safe location so you’re confident when you hit the trail.